Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
- Body and salon furnish
   The general information and safety measures
   Care of components of a body and the car bottom
   Care of an upholstery and carpet coverings of salon
   Repair of insignificant damages кузовных panels
   Repair seriously damaged кузовных panels
   Removal and installation of a forward bumper
   Removal and installation of a back bumper
   Removal, installation and cowl adjustment
   Removal and installation drive a cable отпускания the cowl lock
   Removal, installation and adjustment of assemblage of the lock of a cowl
   Removal and installation of doors
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of door handles and lock components
   Removal and installation of door glasses and regulators Glass lifts
   Removal and installation of a door of a back and its persistent bars
   Removal, installation and adjustment of components of the lock of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive Glass lifts
   Removal and installation of external rear-view mirrors and accompanying components
   Windscreen and glass of a door of a back - the general information
   The top hatch
   Removal and installation of elements кузовной furnish
   Removal and installation of seats
   The mechanism натяжителя a seat belt of a forward seat - the general information
   Removal and installation of components of seat belts
   Removal and installation of elements of furnish of salon
   Removal and installation of the central console
   Removal and installation of the panel of devices
   Control кузовные the sizes
+ Onboard electric equipment


Removal and installation of a back bumper

Components of installation of a back bumper

1 — the Bumper
2 — Zaglushka
3 — the Nut
4 — the Washer
5 — the Washer

6 — the Nut
7 — the Overlay
8 — the Cover of a towing eye


Typical components of installation of a back bumper are presented on an illustration.

REMOVAL

 PERFORMANCE ORDER

1. Open a back door. Having hooked, remove decorative caps and give the top nuts of fastening of a back bumper. Remove washers.

2. In case of need for the purpose of maintenance of the best access, prop up wedges forward wheels, then поддомкратьте a back of the car and establish it on props.

3. Under the car give lateral fixing nuts, and also nuts of fastening of the basis of a bumper to a car body. Necessity for definitive removal of nuts is absent, as fixing apertures have the oval form.

4. By means of the assistant liberate the ends of a bumper from lateral support and remove assemblage from the car.

INSTALLATION

 PERFORMANCE ORDER

Installation is made upside-down. Track reliability of a tightening of fixture.